CABINETS - AIR SYSTEM CABINETS AND WORKBENCH

Cabinets intended for the storage of paints with air heating or non heated.
The new Air system cabinets intended for the storage of paints are supplied with plexiglass sliding doors and six shelves suitable for the stock of every can or bottle.
Available in heated and non-heated version, the heating is obtained thanks to hot air produced by a fan (STD vers.) or by a thermo convector (ATEX vers.), that allows keep the constant and homogeneous temperature.
At the base of the cabinet there is a non heated shelf with possibility of stirring.
The cabinets are available both in standard and ATEX version.

Standard heating system

The heating in the standard version is obtained thanks to a fan with resistance placed on the back panel of the cabinet.
The hot air produced is pushed down through the duct and exits in the lower part of cabinet.
The temperature is checked by a thermostat set to 20°C with a sensor placed inside the cabinet.

Atex heating system

The heating in the ATEX version is obtained thanks to an explosion-proof thermo convector placed on the base of cabinet.
The hot air produced rises between the shelves and the back panel in order to heat all the shelves in a homogeneous way.
The temperature is checked by an explosion-proof thermostat set to 19°C placed inside the cabinet.
                                                                                         
  • 1200 cabinet dimensions
    • Non heating version               2225 x 1180(1250) x 330 mm      H x W(*) x D
    • Standard heating version      2225 x 1180(1250) x 425 mm      H x W(*) x D
    • ATEX heating version             2225 x 1180 x 465 mm                   H x W x D
  • 1500 cabinet dimensions
    • Non heating version               2225 x 1480(1550) x 330 mm     H x W(*) x D
    • Standard heating version      2225 x 1480(1550) x 425 mm     H x W(*) x D
    • ATEX heating version             2225 x 1560 x 465 mm                  H x W x D
  • Working temperature                                 5÷40°C
  • Setting temperature of the thermostat from 15 to 25°C (factory setting 20°C)
  • Power supply                                                220V 50/60Hz
  • Absorbed power - stirring module          0,18 kW
  • Absorbed power - standard heating       0,5 kW
  • Absorbed power - ATEX heating              0,75 kW
  • Heating shelves height                               240 mm
  • Heating shelves depth                                265 mm
  • Heating shelves capatity
    • 1200 cabinet   -   11 1L-bottle with stock
    • 1500 cabinet   -   14 1L-bottle with stock
  • Stirring shelves capatity
    • 1200 cabinet   -   5 x 2.5/4 L
    • 1500 cabinet   -   6 x 2.5/4 L

* width with stirring shelf